All MIBs › ATM-FORUM-AUTO-CONFIG › atmfAAL2SscsServiceCategory
atmfAAL2SscsServiceCategory
Module: ATM-FORUM-AUTO-CONFIG
OID (symbolic): ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsServiceCategory
OID (numeric): 1.3.6.1.4.1.353.2.12.6.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object describes the type of service category supported by this AAL2 PVC.
What is atmfAAL2SscsServiceCategory?
This read-only integer specifies the AAL2 service category type. A value of 1 indicates audio/voice service. It determines traffic treatment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.2.12.6.1.9 snmpwalk -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsServiceCategory
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.353.2.12.6.1.9.1 snmpget -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsServiceCategory.1
Start monitoring ATM switches/edge devices (ILMI auto-config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsServiceCategory OID value, configure state conditions and alerts, and monitor any ATM switches/edge devices (ILMI auto-config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.353 | atmForum | ATM-FORUM-ILMI40-MIB |
| 1.3.6.1.4.1.353.2 | atmForumUni | ATM-FORUM-ILMI40-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.353.2.12 | atmfAutoConfigGroup | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6 | atmfAAL2CommonProfileTable | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6.1 | atmfAAL2CommonProfileEntry | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6.1.9 | atmfAAL2SscsServiceCategory | ATM-FORUM-AUTO-CONFIG |