All MIBs › ATM-FORUM-AUTO-CONFIG › atmfAAL2SscsProfileSource
atmfAAL2SscsProfileSource
Module: ATM-FORUM-AUTO-CONFIG
OID (symbolic): ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsProfileSource
OID (numeric): 1.3.6.1.4.1.353.2.12.6.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute describes the source of the profile.
What is atmfAAL2SscsProfileSource?
This read-only integer specifies the standards body defining the profile. A value of 1 indicates ITU-T specification; 2 means proprietary. It identifies the standard.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.2.12.6.1.11 snmpwalk -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsProfileSource
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.353.2.12.6.1.11.1 snmpget -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsProfileSource.1
Start monitoring ATM switches/edge devices (ILMI auto-config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-FORUM-AUTO-CONFIG::atmfAAL2SscsProfileSource OID value, configure state conditions and alerts, and monitor any ATM switches/edge devices (ILMI auto-config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.353 | atmForum | ATM-FORUM-ILMI40-MIB |
| 1.3.6.1.4.1.353.2 | atmForumUni | ATM-FORUM-ILMI40-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.353.2.12 | atmfAutoConfigGroup | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6 | atmfAAL2CommonProfileTable | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6.1 | atmfAAL2CommonProfileEntry | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6.1.11 | atmfAAL2SscsProfileSource | ATM-FORUM-AUTO-CONFIG |