ATM-FORUM-AUTO-CONFIG :: atmfAAL2SscopSduLength

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsATM-FORUM-AUTO-CONFIGatmfAAL2SscopSduLength

atmfAAL2SscopSduLength

Module: ATM-FORUM-AUTO-CONFIG

OID (symbolic): ATM-FORUM-AUTO-CONFIG::atmfAAL2SscopSduLength

OID (numeric): 1.3.6.1.4.1.353.2.12.6.1.24

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The Maximum SSCOP-SDU length. This object is only required is the value of atmfAAL2SscsSsadtStatus is selected else it is not applicable.

What is atmfAAL2SscopSduLength?

This read-only integer specifies maximum SSCOP Service Data Unit size. A value of 32767 allows large frames. It defines segmentation boundaries.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.2.12.6.1.24
snmpwalk -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL2SscopSduLength

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.353.2.12.6.1.24.1
snmpget -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL2SscopSduLength.1

Start monitoring ATM switches/edge devices (ILMI auto-config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-FORUM-AUTO-CONFIG::atmfAAL2SscopSduLength OID value, configure state conditions and alerts, and monitor any ATM switches/edge devices (ILMI auto-config) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.353atmForumATM-FORUM-ILMI40-MIB
1.3.6.1.4.1.353.2atmForumUniATM-FORUM-ILMI40-MIB
Numeric OIDNameModule
1.3.6.1.4.1.353.2.12atmfAutoConfigGroupATM-FORUM-AUTO-CONFIG
1.3.6.1.4.1.353.2.12.6atmfAAL2CommonProfileTableATM-FORUM-AUTO-CONFIG
1.3.6.1.4.1.353.2.12.6.1atmfAAL2CommonProfileEntryATM-FORUM-AUTO-CONFIG
1.3.6.1.4.1.353.2.12.6.1.24atmfAAL2SscopSduLengthATM-FORUM-AUTO-CONFIG