All MIBs › ATM-FORUM-AUTO-CONFIG › atmfAAL2ConfigResponsibility
atmfAAL2ConfigResponsibility
Module: ATM-FORUM-AUTO-CONFIG
OID (symbolic): ATM-FORUM-AUTO-CONFIG::atmfAAL2ConfigResponsibility
OID (numeric): 1.3.6.1.4.1.353.2.12.6.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object identifies which management channel is responsible for AAL2 provisioning and auto-configuration. The user-side IME must check the value of this parameter first before configuring the AAL2 for the PVC to determine whether or not this responsibility lies with ILMI. ilmi - if this is selected then the user-side IME must use the AAL2 Profile defined in this entry and associated AAL2 Profile extension table entry to auto-configure the AAL2 for the PVC. lesEoc - if this is selected then the user-side IME must not auto-configure the AAL2 using ILMI. The AAL2 Profile parameters do not need to be provisioned by the network- side IME and with the exception of this object the AAL2 profile parameters in the ILMI MIB are not applicable. The Loop Emulation Service Embedded Operations Channel (LES EOC) shall be used to provision the AAL2 for the PVC. The start-up AAL2 parameters for this PVC must assume the default values specified in the af-vmoa-0145.000 MIB such that the LES EOC is operational. other - if this is selected then the user-side IME must not auto-configure the AAL2 using ILMI. The AAL2 Profile parameters do not need to be provisioned by the network- side IME and with the exception of this object the AAL2 profile parameters in the ILMI MIB are not applicable. Another mechanism will be used to provision the AAL2 at the ATU-R for the PVC.
What is atmfAAL2ConfigResponsibility?
This read-only integer specifies who configures AAL2 settings. A value of 1 means ILMI auto-configures; 2 means LES does it. It identifies the configuration authority.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.2.12.6.1.3 snmpwalk -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL2ConfigResponsibility
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.353.2.12.6.1.3.1 snmpget -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL2ConfigResponsibility.1
Start monitoring ATM switches/edge devices (ILMI auto-config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-FORUM-AUTO-CONFIG::atmfAAL2ConfigResponsibility OID value, configure state conditions and alerts, and monitor any ATM switches/edge devices (ILMI auto-config) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.353 | atmForum | ATM-FORUM-ILMI40-MIB |
| 1.3.6.1.4.1.353.2 | atmForumUni | ATM-FORUM-ILMI40-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.353.2.12 | atmfAutoConfigGroup | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6 | atmfAAL2CommonProfileTable | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6.1 | atmfAAL2CommonProfileEntry | ATM-FORUM-AUTO-CONFIG |
| 1.3.6.1.4.1.353.2.12.6.1.3 | atmfAAL2ConfigResponsibility | ATM-FORUM-AUTO-CONFIG |