All MIBs › ATM-FORUM-AUTO-CONFIG › atmfAAL1SDT

atmfAAL1SDT

OID (symbolic): ATM-FORUM-AUTO-CONFIG::atmfAAL1SDT

OID (numeric): 1.3.6.1.4.1.353.2.12.3.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates whether Structured Data Transfer (SDT) has been configured at the AAL. A value of TRUE means SDT has been selected. This attribute value can be set to TRUE only when the Forward Error Correction Type attribute equals noFEC.

What is atmfAAL1SDT?

This read-only boolean indicates if Structured Data Transfer is enabled. A value of 1 enables SDT for data payload structuring. It allows circuit emulation over ATM.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.2.12.3.1.6
snmpwalk -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL1SDT

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.353.2.12.3.1.6.1
snmpget -v2c -c public <target> ATM-FORUM-AUTO-CONFIG::atmfAAL1SDT.1

Start monitoring ATM switches/edge devices (ILMI auto-config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-FORUM-AUTO-CONFIG::atmfAAL1SDT OID value, configure state conditions and alerts, and monitor any ATM switches/edge devices (ILMI auto-config) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.353	atmForum	ATM-FORUM-ILMI40-MIB
1.3.6.1.4.1.353.2	atmForumUni	ATM-FORUM-ILMI40-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.353.2.12	atmfAutoConfigGroup	ATM-FORUM-AUTO-CONFIG
1.3.6.1.4.1.353.2.12.3	atmfAAL1ProfileTable	ATM-FORUM-AUTO-CONFIG
1.3.6.1.4.1.353.2.12.3.1	atmfAAL1ProfileEntry	ATM-FORUM-AUTO-CONFIG
1.3.6.1.4.1.353.2.12.3.1.6	atmfAAL1SDT	ATM-FORUM-AUTO-CONFIG

ATM-FORUM-AUTO-CONFIG :: atmfAAL1SDT

atmfAAL1SDT

Module

This MIB depends on