All MIBs › ATM-DXI-MIB › atmDxiConfMode
atmDxiConfMode
Module: ATM-DXI-MIB
OID (symbolic): ATM-DXI-MIB::atmDxiConfMode
OID (numeric): 1.3.6.1.4.1.353.3.2.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object identifies the dxi mode being used at the atm dxi port.
What is atmDxiConfMode?
This read-write parameter sets the Data Exchange Interface protocol mode. A value of 1 indicates mode 1a, the basic DXI protocol. A value of 3 selects mode 2 for advanced features.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.3.2.2.1.3 snmpwalk -v2c -c public <target> ATM-DXI-MIB::atmDxiConfMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.353.3.2.2.1.3.1 snmpget -v2c -c public <target> ATM-DXI-MIB::atmDxiConfMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.353.3.2.2.1.3.1 i <value>
Start monitoring Routers/DSU-CSU with ATM DXI interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ATM-DXI-MIB::atmDxiConfMode OID value, configure state conditions and alerts, and monitor any Routers/DSU-CSU with ATM DXI interfaces from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.353 | atmForum | ATM-DXI-MIB |
| 1.3.6.1.4.1.353.3 | atmUniDxi | ATM-DXI-MIB |
| 1.3.6.1.4.1.353.3.2 | atmDxi | ATM-DXI-MIB |
| 1.3.6.1.4.1.353.3.2.2 | atmDxiConfTable | ATM-DXI-MIB |
| 1.3.6.1.4.1.353.3.2.2.1 | atmDxiConfEntry | ATM-DXI-MIB |
| 1.3.6.1.4.1.353.3.2.2.1.3 | atmDxiConfMode | ATM-DXI-MIB |