All MIBs › AT-ALMMON-MIB › atAlmMonOutputLedUsage
atAlmMonOutputLedUsage
Module: AT-ALMMON-MIB
OID (symbolic): AT-ALMMON-MIB::atAlmMonOutputLedUsage
OID (numeric): 1.3.6.1.4.1.207.8.4.4.3.26.5.1.3
Node type: OBJECT-TYPE
Type: AtAlmMonActionUseOutput
Access: read-write
Description: This object indicates whether or not an LED is used.
Since there are entries only for existing associations between the output LED(s) and the alarms, the object value should be always used(2).
If a user sets a value of unused(1) to this object, then the whole entry will be deleted.
If a user sets a value of used(2) to this object with new index, then a new entry should be created if stack member id and alarm id are specified properly in the index.
What is atAlmMonOutputLedUsage?
This read-write enumeration controls whether the LED is active or inactive. It enables/disables LED operation. Setting to unused(1) deletes the association.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.3.26.5.1.3 snmpwalk -v2c -c public <target> AT-ALMMON-MIB::atAlmMonOutputLedUsage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.4.4.3.26.5.1.3.1 snmpget -v2c -c public <target> AT-ALMMON-MIB::atAlmMonOutputLedUsage.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.4.4.3.26.5.1.3.1 s <value>
Start monitoring Allied Telesis managed switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AT-ALMMON-MIB::atAlmMonOutputLedUsage OID value, configure state conditions and alerts, and monitor any Allied Telesis managed switches and routers from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.4 | brouterMib | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4 | atRouter | AT-SMI-MIB |
| 1.3.6.1.4.1.207.8.4.4.3 | sysinfo | AT-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.3.26 | atAlmMon | AT-ALMMON-MIB |
| 1.3.6.1.4.1.207.8.4.4.3.26.5 | atAlmMonOutputLedTable | AT-ALMMON-MIB |
| 1.3.6.1.4.1.207.8.4.4.3.26.5.1 | atAlmMonOutputLedEntry | AT-ALMMON-MIB |
| 1.3.6.1.4.1.207.8.4.4.3.26.5.1.3 | atAlmMonOutputLedUsage | AT-ALMMON-MIB |