All MIBs › ASCEND-MIB › doResynchronize

doResynchronize

OID (symbolic): ASCEND-MIB::doResynchronize

OID (numeric): 1.3.6.1.4.1.529.6.1.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When read returns valid if the indexed slot/item can issue a resynchronize command. Writing any value will cause a resynchronize command to be issued when valid, otherwise the write is ignored.

What is doResynchronize?

Triggers a resynchronization command on the specified interface to reset connection protocols. Helps recover from protocol desynchronization issues. Returns 'valid' if the interface supports this operation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.529.6.1.1.10
snmpwalk -v2c -c public <target> ASCEND-MIB::doResynchronize

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.529.6.1.1.10.1
snmpget -v2c -c public <target> ASCEND-MIB::doResynchronize.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.529.6.1.1.10.1 i <value>

Start monitoring Ascend Communications MAX and Pipeline WAN access/dial-up equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ASCEND-MIB::doResynchronize OID value, configure state conditions and alerts, and monitor any Ascend Communications MAX and Pipeline WAN access/dial-up equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.529	ascend	ASCEND-MIB
1.3.6.1.4.1.529.6	doGroup	ASCEND-MIB
1.3.6.1.4.1.529.6.1	doTable	ASCEND-MIB
1.3.6.1.4.1.529.6.1.1	doEntry	ASCEND-MIB
1.3.6.1.4.1.529.6.1.1.10	doResynchronize	ASCEND-MIB

ASCEND-MIB :: doResynchronize

doResynchronize

Module

This MIB depends on