All MIBs › ASCEND-MIB › doBegEndRemoteLB
doBegEndRemoteLB
Module: ASCEND-MIB
OID (symbolic): ASCEND-MIB::doBegEndRemoteLB
OID (numeric): 1.3.6.1.4.1.529.6.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
When read returns valid if the indexed slot/item can enter or exit remote loopback. Writing any value will cause the current remote loopback state to be toggled when valid, otherwise the write is ignored.
What is doBegEndRemoteLB?
Toggles remote loopback testing mode on the specified interface. Used for diagnostic testing of remote links without local access. Returns 'valid' if supported.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.529.6.1.1.8 snmpwalk -v2c -c public <target> ASCEND-MIB::doBegEndRemoteLB
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.529.6.1.1.8.1 snmpget -v2c -c public <target> ASCEND-MIB::doBegEndRemoteLB.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.529.6.1.1.8.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.529 | ascend | ASCEND-MIB |
| 1.3.6.1.4.1.529.6 | doGroup | ASCEND-MIB |
| 1.3.6.1.4.1.529.6.1 | doTable | ASCEND-MIB |
| 1.3.6.1.4.1.529.6.1.1 | doEntry | ASCEND-MIB |
| 1.3.6.1.4.1.529.6.1.1.8 | doBegEndRemoteLB | ASCEND-MIB |