All MIBs › ARUBAWIRED-POE-MIB › arubaWiredPoePethPsePortPowerAllocateBy
arubaWiredPoePethPsePortPowerAllocateBy
Module: ARUBAWIRED-POE-MIB
OID (symbolic): ARUBAWIRED-POE-MIB::arubaWiredPoePethPsePortPowerAllocateBy
OID (numeric): 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Allows control over the power allocation strategy used for this port. Two power allocation strategies are class(2) and usage(1). When allocating by usage(1) power is delivered as requested by a PD. When allocating by class(2) the PSE uses the power ramp-up signature of the PD to identify the PD's power class and use the power level for the specified class.
What is arubaWiredPoePethPsePortPowerAllocateBy?
Controls whether this PoE port allocates power based on actual usage by the connected powered device (PD) or based on the device's PoE class rating. Selecting class-based allocation reserves a fixed amount of power upfront, while usage-based allocation delivers only what the device actively draws.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1 snmpwalk -v2c -c public <target> ARUBAWIRED-POE-MIB::arubaWiredPoePethPsePortPowerAllocateBy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1.1 snmpget -v2c -c public <target> ARUBAWIRED-POE-MIB::arubaWiredPoePethPsePortPowerAllocateBy.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1.1 i <value>
Start monitoring Aruba (HPE) ArubaOS-CX wired switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ARUBAWIRED-POE-MIB::arubaWiredPoePethPsePortPowerAllocateBy OID value, configure state conditions and alerts, and monitor any Aruba (HPE) ArubaOS-CX wired switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.47196 | hpe | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4 | hpeNetworking | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1 | wiredNetworkingDevices | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1.1 | arubaOS_CX | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1.1.3 | wndFeatures | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1.1.3.8 | arubaWiredPoeMIB | ARUBAWIRED-NETWORKING-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.47196.4.1.1.3.8.1 | arubaWiredPoePethPsePort | ARUBAWIRED-POE-MIB |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1 | arubaWiredPoePethPsePortTable | ARUBAWIRED-POE-MIB |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1 | arubaWiredPoePethPsePortEntry | ARUBAWIRED-POE-MIB |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.1.1.1 | arubaWiredPoePethPsePortPowerAllocateBy | ARUBAWIRED-POE-MIB |