All MIBs › ARUBAWIRED-POE-MIB › arubaWiredPoePethPsePortDetectionStatusPairA
arubaWiredPoePethPsePortDetectionStatusPairA
Module: ARUBAWIRED-POE-MIB
OID (symbolic): ARUBAWIRED-POE-MIB::arubaWiredPoePethPsePortDetectionStatusPairA
OID (numeric): 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Describes the operational status of the port PD detection. A value of deliveringPowerAltA - indicates that the PSE State diagram is in the state POWER_ON_PRI if alt_pri='a', or the state POWER_ON_SEC if alt_pri='b'. A value of faultAltA - indicates that the PSE State diagram is in the state IDLE_PRI if alt_pri='a', or the state IDLE_SEC if alt_pri='b' due to the variable error_condition_pri = TRUE (if alt_pri='a') or error_condition_sec = TRUE (if alt_pri='b'). A value of searchingAltA - indicates the PSE State diagram is in a state other than those listed above.
What is arubaWiredPoePethPsePortDetectionStatusPairA?
Describes the PoE detection and power delivery status for wire pair A (the primary alternate) on this port, indicating states such as actively delivering power, fault conditions, or no PD detected. This is relevant for dual-pair PoE (802.3bt) deployments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.1 snmpwalk -v2c -c public <target> ARUBAWIRED-POE-MIB::arubaWiredPoePethPsePortDetectionStatusPairA
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.1.1 snmpget -v2c -c public <target> ARUBAWIRED-POE-MIB::arubaWiredPoePethPsePortDetectionStatusPairA.1
Start monitoring Aruba (HPE) ArubaOS-CX wired switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ARUBAWIRED-POE-MIB::arubaWiredPoePethPsePortDetectionStatusPairA OID value, configure state conditions and alerts, and monitor any Aruba (HPE) ArubaOS-CX wired switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.47196 | hpe | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4 | hpeNetworking | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1 | wiredNetworkingDevices | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1.1 | arubaOS_CX | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1.1.3 | wndFeatures | ARUBAWIRED-NETWORKING-OID |
| 1.3.6.1.4.1.47196.4.1.1.3.8 | arubaWiredPoeMIB | ARUBAWIRED-NETWORKING-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.47196.4.1.1.3.8.1 | arubaWiredPoePethPsePort | ARUBAWIRED-POE-MIB |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2 | arubaWiredPoePethPseFourPairPortTable | ARUBAWIRED-POE-MIB |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1 | arubaWiredPoePethPseFourPairPortEntry | ARUBAWIRED-POE-MIB |
| 1.3.6.1.4.1.47196.4.1.1.3.8.1.2.1.1 | arubaWiredPoePethPsePortDetectionStatusPairA | ARUBAWIRED-POE-MIB |