ARTEM-COMPOINT-WLAN-MIB :: artemRadioChannel

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsARTEM-COMPOINT-WLAN-MIBartemRadioChannel

artemRadioChannel

Module: ARTEM-COMPOINT-WLAN-MIB

OID (symbolic): ARTEM-COMPOINT-WLAN-MIB::artemRadioChannel

OID (numeric): 1.3.6.1.4.1.4280.5.3.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Selecting a radio channel by writing this attribute implicitly defines the radio band to use. Channels 1..14 implies 2.4 GHz Channels 30.. implies 5 GHz Selecting any channel outside the ranges above selects 2.4 GHz with DFS. Is the selected channel part of a DFS-only subband or is it outside of any allowed subband, then DFS will be activated. Reading this attribute always returns the actually working channel, even with DFS. A returned value of 0 means no channel has (yet) been selected, perhaps due to 5 GHz band scanning.

What is artemRadioChannel?

An INTEGER (0..199) read-write object selecting the wireless channel frequency band. Writing channels 1-14 sets 2.4 GHz; 30+ sets 5 GHz; DFS channels trigger spectrum management. Setting to 6 selects 2.4 GHz center frequency; setting to 36 selects 5 GHz.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4280.5.3.1.2
snmpwalk -v2c -c public <target> ARTEM-COMPOINT-WLAN-MIB::artemRadioChannel

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4280.5.3.1.2.1
snmpget -v2c -c public <target> ARTEM-COMPOINT-WLAN-MIB::artemRadioChannel.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4280.5.3.1.2.1 i <value>

Start monitoring Funkwerk (artem) ComPoint 802.11 WLAN access points (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ARTEM-COMPOINT-WLAN-MIB::artemRadioChannel OID value, configure state conditions and alerts, and monitor any Funkwerk (artem) ComPoint 802.11 WLAN access points (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4280artemARTEM-COMPOINT-WLAN-MIB
1.3.6.1.4.1.4280.5artemWLANARTEM-COMPOINT-WLAN-MIB
1.3.6.1.4.1.4280.5.3artemRadioParametersTableARTEM-COMPOINT-WLAN-MIB
1.3.6.1.4.1.4280.5.3.1artemRadioParametersEntryARTEM-COMPOINT-WLAN-MIB
1.3.6.1.4.1.4280.5.3.1.2artemRadioChannelARTEM-COMPOINT-WLAN-MIB