All MIBs › APPLIC-MIB › lstIntPortInTraffic
lstIntPortInTraffic
Module: APPLIC-MIB
OID (symbolic): APPLIC-MIB::lstIntPortInTraffic
OID (numeric): 1.3.6.1.4.1.81.19.4.1.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
In traffic to the HSB from the ring as part of the maximum possible utilization, 4Mbps or 16Mbps, expressed in percents. The In traffic includes only traffic going from stations on the local ring to stations on other rings.
What is lstIntPortInTraffic?
This integer (0-100 percent) shows incoming HSB traffic as percentage of max capacity. Engineers use it to monitor backbone saturation from local ring sources. A value of 30% indicates moderate incoming traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.19.4.1.1.1.9 snmpwalk -v2c -c public <target> APPLIC-MIB::lstIntPortInTraffic
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.19.4.1.1.1.9.1 snmpget -v2c -c public <target> APPLIC-MIB::lstIntPortInTraffic.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| 1.3.6.1.4.1.81.19 | lntLanSwitch | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.4 | lst | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.4.1 | lstIntPort | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.4.1.1 | lstIntPortTable | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.4.1.1.1 | lstIntPortEntry | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.4.1.1.1.9 | lstIntPortInTraffic | APPLIC-MIB |