APPLIC-MIB :: lsePortPolarity

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPPLIC-MIBlsePortPolarity

lsePortPolarity

Module: APPLIC-MIB

OID (symbolic): APPLIC-MIB::lsePortPolarity

OID (numeric): 1.3.6.1.4.1.81.19.1.3.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting the value of this attribute to ON activates the automatic port polarity detection mode.

What is lsePortPolarity?

Enum (on/off) enabling automatic polarity detection for this port's physical signal. Engineers enable on connections where wire pair orientation is uncertain; device auto-corrects RX/TX swaps.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.19.1.3.1.1.3
snmpwalk -v2c -c public <target> APPLIC-MIB::lsePortPolarity

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.81.19.1.3.1.1.3.1
snmpget -v2c -c public <target> APPLIC-MIB::lsePortPolarity.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.81.19.1.3.1.1.3.1 i <value>

Start monitoring Legacy LAN switch/Ethernet segment concentrator (vendor unconfirmed) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPLIC-MIB::lsePortPolarity OID value, configure state conditions and alerts, and monitor any Legacy LAN switch/Ethernet segment concentrator (vendor unconfirmed) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.81lannetGEN-MIB
Numeric OIDNameModule
1.3.6.1.4.1.81.19lntLanSwitchAPPLIC-MIB
1.3.6.1.4.1.81.19.1lseAPPLIC-MIB
1.3.6.1.4.1.81.19.1.3lsePortAPPLIC-MIB
1.3.6.1.4.1.81.19.1.3.1lsePortTableAPPLIC-MIB
1.3.6.1.4.1.81.19.1.3.1.1lsePortEntryAPPLIC-MIB
1.3.6.1.4.1.81.19.1.3.1.1.3lsePortPolarityAPPLIC-MIB