All MIBs › APPLIC-MIB › lseIntPortRxReject
lseIntPortRxReject
Module: APPLIC-MIB
OID (symbolic): APPLIC-MIB::lseIntPortRxReject
OID (numeric): 1.3.6.1.4.1.81.19.1.2.1.1.30
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: The number of Rx buffer full observed on a specified port, from the line toward the High-speed bus.
What is lseIntPortRxReject?
Read-only counter of RX buffer full events on this port from line to HSB. Engineers monitor this for congestion; high counts suggest port is receiving faster than HSB can accept.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.19.1.2.1.1.30 snmpwalk -v2c -c public <target> APPLIC-MIB::lseIntPortRxReject
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.19.1.2.1.1.30.1 snmpget -v2c -c public <target> APPLIC-MIB::lseIntPortRxReject.1
Start monitoring Legacy LAN switch/Ethernet segment concentrator (vendor unconfirmed) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPLIC-MIB::lseIntPortRxReject OID value, configure state conditions and alerts, and monitor any Legacy LAN switch/Ethernet segment concentrator (vendor unconfirmed) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.19 | lntLanSwitch | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1 | lse | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.2 | lseIntPort | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.2.1 | lseIntPortTable | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.2.1.1 | lseIntPortEntry | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.2.1.1.30 | lseIntPortRxReject | APPLIC-MIB |