All MIBs › APPLIC-MIB › lseIntPortIgnoreBusy
lseIntPortIgnoreBusy
Module: APPLIC-MIB
OID (symbolic): APPLIC-MIB::lseIntPortIgnoreBusy
OID (numeric): 1.3.6.1.4.1.81.19.1.2.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Setting the value of this attribute to on(1) activates the ignore busy mode. The busy signal toward the high-speed bus is not activated even though the TX buffer is full.
What is lseIntPortIgnoreBusy?
Enum (on/off) suppressing the busy signal to HSB even when TX buffer is full. Engineers disable this for congestion control; enabled allows overflowing packets, risking loss but maximizing throughput.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.19.1.2.1.1.14 snmpwalk -v2c -c public <target> APPLIC-MIB::lseIntPortIgnoreBusy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.19.1.2.1.1.14.1 snmpget -v2c -c public <target> APPLIC-MIB::lseIntPortIgnoreBusy.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.19.1.2.1.1.14.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| 1.3.6.1.4.1.81.19 | lntLanSwitch | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1 | lse | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.2 | lseIntPort | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.2.1 | lseIntPortTable | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.2.1.1 | lseIntPortEntry | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.2.1.1.14 | lseIntPortIgnoreBusy | APPLIC-MIB |