All MIBs › APPLIC-MIB › lseGroupNormOpDelay
lseGroupNormOpDelay
Module: APPLIC-MIB
OID (symbolic): APPLIC-MIB::lseGroupNormOpDelay
OID (numeric): 1.3.6.1.4.1.81.19.1.1.1.19
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
When sets to a value greater than 0 (zero) and the MIB item lseGroupNormOpCl is equal to closed(2), this item define the time delay that the module will remain in normally open mode before it will move to normaly close mode. This will be activated after the user will reset the module. The value is in seconds.
What is lseGroupNormOpDelay?
Integer (0-600000 seconds) defining delay before normally-closed mode takes effect after reset. Engineers set this to allow MAC table stabilization; e.g., 60 seconds before stringent filtering resumes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.19.1.1.1.19 snmpwalk -v2c -c public <target> APPLIC-MIB::lseGroupNormOpDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.19.1.1.1.19.1 snmpget -v2c -c public <target> APPLIC-MIB::lseGroupNormOpDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.19.1.1.1.19.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| 1.3.6.1.4.1.81.19 | lntLanSwitch | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1 | lse | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1 | lseGroupTable | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1.1 | lseGroupEntry | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1.1.19 | lseGroupNormOpDelay | APPLIC-MIB |