All MIBs › APPLIC-MIB › lseGroupJamPrevent
lseGroupJamPrevent
Module: APPLIC-MIB
OID (symbolic): APPLIC-MIB::lseGroupJamPrevent
OID (numeric): 1.3.6.1.4.1.81.19.1.1.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Jam prevent flag. Functionaly, Jam prevent is a back-pressure into the line direction. There are two modes of opration: 1) automatic - the sensor gets the items status from HW 2) manual - the sensor gets the items status from user.
What is lseGroupJamPrevent?
Enum (on/off) enabling jam prevention mechanism with backpressure control in LANswitch. Engineers enable this to reduce collision recovery overhead; operates in automatic (HW-based) or manual (user-controlled) mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.19.1.1.1.17 snmpwalk -v2c -c public <target> APPLIC-MIB::lseGroupJamPrevent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.19.1.1.1.17.1 snmpget -v2c -c public <target> APPLIC-MIB::lseGroupJamPrevent.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.19.1.1.1.17.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| 1.3.6.1.4.1.81.19 | lntLanSwitch | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1 | lse | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1 | lseGroupTable | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1.1 | lseGroupEntry | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1.1.17 | lseGroupJamPrevent | APPLIC-MIB |