All MIBs › APPLIC-MIB › lseGroupIPGJamLength
lseGroupIPGJamLength
Module: APPLIC-MIB
OID (symbolic): APPLIC-MIB::lseGroupIPGJamLength
OID (numeric): 1.3.6.1.4.1.81.19.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Defines the IPG jam length in Ethernet bit time (100nS) start at 16 bit time in steps of 16, to 112 bit time. For LFE-100, (Fast Ethernet bit time (10nS)) values are from 48 bit times (480nano-seconds) in step of 4, to 124 (1240nano-seconds). Any number between the defined values will take to nearest smaller value.
What is lseGroupIPGJamLength?
Integer (16-124 for Ethernet, 48-124 for Fast Ethernet) in bit times defining inter-packet gap during jam signal. Engineers set this to control collision recovery timing; timing affects throughput under error conditions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.19.1.1.1.6 snmpwalk -v2c -c public <target> APPLIC-MIB::lseGroupIPGJamLength
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.19.1.1.1.6.1 snmpget -v2c -c public <target> APPLIC-MIB::lseGroupIPGJamLength.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.19.1.1.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| 1.3.6.1.4.1.81.19 | lntLanSwitch | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1 | lse | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1 | lseGroupTable | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1.1 | lseGroupEntry | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1.1.6 | lseGroupIPGJamLength | APPLIC-MIB |