All MIBs › APPLIC-MIB › lseGroupFastOpen
lseGroupFastOpen
Module: APPLIC-MIB
OID (symbolic): APPLIC-MIB::lseGroupFastOpen
OID (numeric): 1.3.6.1.4.1.81.19.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting the value of this attribute to ON activates the port for short idle time when code violation was detected.
What is lseGroupFastOpen?
Enum (on/off/notSupported) enabling fast port opening after code violation detection on AppleTalk LANswitch. Engineers enable this to reduce recovery time when signal errors are detected on copper ports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.19.1.1.1.2 snmpwalk -v2c -c public <target> APPLIC-MIB::lseGroupFastOpen
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.19.1.1.1.2.1 snmpget -v2c -c public <target> APPLIC-MIB::lseGroupFastOpen.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.19.1.1.1.2.1 i <value>
Start monitoring Legacy LAN switch/Ethernet segment concentrator (vendor unconfirmed) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPLIC-MIB::lseGroupFastOpen OID value, configure state conditions and alerts, and monitor any Legacy LAN switch/Ethernet segment concentrator (vendor unconfirmed) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.19 | lntLanSwitch | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1 | lse | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1 | lseGroupTable | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1.1 | lseGroupEntry | APPLIC-MIB |
| 1.3.6.1.4.1.81.19.1.1.1.2 | lseGroupFastOpen | APPLIC-MIB |