All MIBs › APPLIC-MIB › lseGroupCParameter

lseGroupCParameter

OID (symbolic): APPLIC-MIB::lseGroupCParameter

OID (numeric): 1.3.6.1.4.1.81.19.1.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Defines the number of consecutive collisions the port waits before it ceases transmitting of 512 bits time toward the station.

What is lseGroupCParameter?

Integer (1-7) defining consecutive collision limit before port backs off transmission. Engineers tune this for network load; higher values = more retries, lower = faster backoff for congested segments.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.19.1.1.1.5
snmpwalk -v2c -c public <target> APPLIC-MIB::lseGroupCParameter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.81.19.1.1.1.5.1
snmpget -v2c -c public <target> APPLIC-MIB::lseGroupCParameter.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.81.19.1.1.1.5.1 i <value>

Start monitoring Legacy LAN switch/Ethernet segment concentrator (vendor unconfirmed) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPLIC-MIB::lseGroupCParameter OID value, configure state conditions and alerts, and monitor any Legacy LAN switch/Ethernet segment concentrator (vendor unconfirmed) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.81	lannet	GEN-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.81.19	lntLanSwitch	APPLIC-MIB
1.3.6.1.4.1.81.19.1	lse	APPLIC-MIB
1.3.6.1.4.1.81.19.1.1	lseGroupTable	APPLIC-MIB
1.3.6.1.4.1.81.19.1.1.1	lseGroupEntry	APPLIC-MIB
1.3.6.1.4.1.81.19.1.1.1.5	lseGroupCParameter	APPLIC-MIB

APPLIC-MIB :: lseGroupCParameter

lseGroupCParameter

Module

This MIB depends on