All MIBs › APPLIC-MIB › alarmUtilitiesCommand
alarmUtilitiesCommand
Module: APPLIC-MIB
OID (symbolic): APPLIC-MIB::alarmUtilitiesCommand
OID (numeric): 1.3.6.1.4.1.81.30.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The alarms command can be one of the follows: 1 - idle - idle state. 2 - clearAll - clear all alarms and events in the Agent tables. 254 - failed - If the Agent does not succeed to perform the command, the alarmUtilitiesCommand will be changed to failed, to indicate the fail of performing the last Command.
What is alarmUtilitiesCommand?
This read-write enumeration (idle/clearAll) controls alarm management. Network engineers set this to 'clearAll' to reset all alarms and events. It automatically returns to 'idle' or 'failed' after execution.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.30.1.2 snmpwalk -v2c -c public <target> APPLIC-MIB::alarmUtilitiesCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.30.1.2.1 snmpget -v2c -c public <target> APPLIC-MIB::alarmUtilitiesCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.30.1.2.1 i <value>
Start monitoring Legacy LAN switch/Ethernet segment concentrator (vendor unconfirmed) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPLIC-MIB::alarmUtilitiesCommand OID value, configure state conditions and alerts, and monitor any Legacy LAN switch/Ethernet segment concentrator (vendor unconfirmed) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.30 | smon | APPLIC-MIB |
| 1.3.6.1.4.1.81.30.1 | alarms | APPLIC-MIB |
| 1.3.6.1.4.1.81.30.1.2 | alarmUtilitiesCommand | APPLIC-MIB |