All MIBs › APPIAN-LPORT-DS3-MIB › acLogicalDs3ConfigSendCode
acLogicalDs3ConfigSendCode
Module: APPIAN-LPORT-DS3-MIB
OID (symbolic): APPIAN-LPORT-DS3-MIB::acLogicalDs3ConfigSendCode
OID (numeric): 1.3.6.1.4.1.2785.2.4.3.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested.
The values mean:
ds3SendNoCode sending looped or normal data
ds3SendLineCode sending a request for a line loopback
ds3SendPayloadCode sending a request for a payload loopback (i.e., all DS1s in a DS3 frame)
ds3SendResetCode sending a loopback deactivation request
ds3SendTestPattern sending a test pattern.
What is acLogicalDs3ConfigSendCode?
An enumerated code type (noCode, lineCode, payloadCode, resetCode, etc.) controlling what diagnostic pattern the device transmits on the DS3 interface. Network engineers use this to send line loopback requests or payload loopback requests to the far end for testing. Example: setting to lineCode(2) instructs the device to transmit a line loopback code so the far end enters loopback mode.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2785 | appian | APPIAN-SMI-MIB |
| 1.3.6.1.4.1.2785.2 | acOsap | APPIAN-SMI-MIB |
| 1.3.6.1.4.1.2785.2.4 | acLport | APPIAN-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2785.2.4.3 | acLogicalDs3 | APPIAN-LPORT-DS3-MIB |
| 1.3.6.1.4.1.2785.2.4.3.1 | acLogicalDs3ConfigTable | APPIAN-LPORT-DS3-MIB |
| 1.3.6.1.4.1.2785.2.4.3.1.1 | acLogicalDs3ConfigEntry | APPIAN-LPORT-DS3-MIB |
| 1.3.6.1.4.1.2785.2.4.3.1.1.12 | acLogicalDs3ConfigSendCode | APPIAN-LPORT-DS3-MIB |