APPIAN-LPORT-DS3-MIB :: acLogicalDs3ConfigLoopbackStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPPIAN-LPORT-DS3-MIBacLogicalDs3ConfigLoopbackStatus

acLogicalDs3ConfigLoopbackStatus

Module: APPIAN-LPORT-DS3-MIB

OID (symbolic): APPIAN-LPORT-DS3-MIB::acLogicalDs3ConfigLoopbackStatus

OID (numeric): 1.3.6.1.4.1.2785.2.4.3.1.1.23

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end.

The acLogicalDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously.

The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopback

What is acLogicalDs3ConfigLoopbackStatus?

An integer (1-127) bit map showing all active loopback modes on the DS3, including near-end and far-end loopbacks. Network engineers decode this to know which traffic paths are currently looped for testing. Example: a value of 3 might indicate both near-end payload loopback and far-end loopback are active.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2785.2.4.3.1.1.23
snmpwalk -v2c -c public <target> APPIAN-LPORT-DS3-MIB::acLogicalDs3ConfigLoopbackStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2785.2.4.3.1.1.23.1
snmpget -v2c -c public <target> APPIAN-LPORT-DS3-MIB::acLogicalDs3ConfigLoopbackStatus.1

Start monitoring Appian Communications access platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPIAN-LPORT-DS3-MIB::acLogicalDs3ConfigLoopbackStatus OID value, configure state conditions and alerts, and monitor any Appian Communications access platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2785appianAPPIAN-SMI-MIB
1.3.6.1.4.1.2785.2acOsapAPPIAN-SMI-MIB
1.3.6.1.4.1.2785.2.4acLportAPPIAN-SMI-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2785.2.4.3acLogicalDs3APPIAN-LPORT-DS3-MIB
1.3.6.1.4.1.2785.2.4.3.1acLogicalDs3ConfigTableAPPIAN-LPORT-DS3-MIB
1.3.6.1.4.1.2785.2.4.3.1.1acLogicalDs3ConfigEntryAPPIAN-LPORT-DS3-MIB
1.3.6.1.4.1.2785.2.4.3.1.1.23acLogicalDs3ConfigLoopbackStatusAPPIAN-LPORT-DS3-MIB