APPC-MIB :: appcCnosTargetModeName

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAPPC-MIBappcCnosTargetModeName

appcCnosTargetModeName

Module: APPC-MIB

OID (symbolic): APPC-MIB::appcCnosTargetModeName

OID (numeric): 1.3.6.1.2.1.34.3.1.1.4.11

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Specifies the mode name to which the CNOS command is to be

applied.

This object should be set to the desired value before setting the command (appcCnosCommand).

This parameter applies to all CNOS verbs.

What is appcCnosTargetModeName?

Specifies the mode name (session profile) to which the CNOS command applies. This field is required for all CNOS verbs and must be set before the command object is triggered.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.34.3.1.1.4.11
snmpwalk -v2c -c public <target> APPC-MIB::appcCnosTargetModeName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.34.3.1.1.4.11.1
snmpget -v2c -c public <target> APPC-MIB::appcCnosTargetModeName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.34.3.1.1.4.11.1 s <value>

Start monitoring SNA/APPC gateway or protocol converter with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APPC-MIB::appcCnosTargetModeName OID value, configure state conditions and alerts, and monitor any SNA/APPC gateway or protocol converter from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.34snanauMIBSNA-NAU-MIB
Numeric OIDNameModule
1.3.6.1.2.1.34.3appcMIBAPPC-MIB
1.3.6.1.2.1.34.3.1appcObjectsAPPC-MIB
1.3.6.1.2.1.34.3.1.1appcGlobalAPPC-MIB
1.3.6.1.2.1.34.3.1.1.4appcCnosControlAPPC-MIB
1.3.6.1.2.1.34.3.1.1.4.11appcCnosTargetModeNameAPPC-MIB