All MIBs › ALU-POWER-ETHERNET-MIB › pethPsePortDetectionStatus
pethPsePortDetectionStatus
Module: ALU-POWER-ETHERNET-MIB
OID (symbolic): ALU-POWER-ETHERNET-MIB::pethPsePortDetectionStatus
OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state IDLE A value of searching(2)- indicates that the PSE State diagram is in the state DETECTION, CLASSIFICATION, SIGNATURE_INVALID or BACKOFF. A value of deliveringPower(4) - indicates that the PSE State diagram is in the state POWER_UP, POWER_ON or POWER_OFF. A value of fault(5) - indicates that the PSE State diagram is in the state TEST_ERROR or the state IDLE due to the variable error condition. Faults detected are vendor specific. A value of test(7) - indicates that the PSE State diagram is in the state TEST_MODE. A value of denyLowPriority(8) indicates that the port was disabled by the power management system, in order to keep active higher priority ports.
What is pethPsePortDetectionStatus?
Read-only status showing PD detection state (disabled, searching, delivering, fault, etc.). Network engineers monitor this to track power delivery progression. Example: A value of 4 (deliveringPower) means power is actively supplied.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.1.1.7 snmpwalk -v2c -c public <target> ALU-POWER-ETHERNET-MIB::pethPsePortDetectionStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.1.1.7.1 snmpget -v2c -c public <target> ALU-POWER-ETHERNET-MIB::pethPsePortDetectionStatus.1
Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALU-POWER-ETHERNET-MIB::pethPsePortDetectionStatus OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6486 | alcatel | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801 | alcatelIND1BaseMIB | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1 | alcatelIND1Management | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2 | managementIND1Software | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1 | softwareIND1Entities | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1.27 | softentIND1InLinePower | ALCATEL-IND1-BASE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.27.999 | powerEthernetMIB | ALU-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.27.999.1 | pethObjects | ALU-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.1 | pethPsePortTable | ALU-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.1.1 | pethPsePortEntry | ALU-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.1.1.7 | pethPsePortDetectionStatus | ALU-POWER-ETHERNET-MIB |