All MIBs › ALU-POWER-ETHERNET-MIB › pethMainPseUsageThreshold
pethMainPseUsageThreshold
Module: ALU-POWER-ETHERNET-MIB
OID (symbolic): ALU-POWER-ETHERNET-MIB::pethMainPseUsageThreshold
OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.3.1.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The usage threshold expressed in percents for comparing the measured power and initiating an alarm if the threshold is exceeded.
What is pethMainPseUsageThreshold?
Writable percentage threshold for triggering power usage alarms. Network ops use this to configure alerting on high consumption. Example: A value of 80 triggers alerts when 80% of capacity is consumed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.3.1.1.7 snmpwalk -v2c -c public <target> ALU-POWER-ETHERNET-MIB::pethMainPseUsageThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.3.1.1.7.1 snmpget -v2c -c public <target> ALU-POWER-ETHERNET-MIB::pethMainPseUsageThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.3.1.1.7.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> pethMainPseUsageThreshold.1
Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALU-POWER-ETHERNET-MIB::pethMainPseUsageThreshold OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6486 | alcatel | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801 | alcatelIND1BaseMIB | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1 | alcatelIND1Management | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2 | managementIND1Software | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1 | softwareIND1Entities | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1.27 | softentIND1InLinePower | ALCATEL-IND1-BASE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.27.999 | powerEthernetMIB | ALU-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.27.999.1 | pethObjects | ALU-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.3 | pethMainPseObjects | ALU-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.3.1 | pethMainPseTable | ALU-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.3.1.1 | pethMainPseEntry | ALU-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.27.999.1.3.1.1.7 | pethMainPseUsageThreshold | ALU-POWER-ETHERNET-MIB |