All MIBs › AGENT-GENERAL-MIB › agentBscSwFileBootUpImage
agentBscSwFileBootUpImage
Module: AGENT-GENERAL-MIB
OID (symbolic): AGENT-GENERAL-MIB::agentBscSwFileBootUpImage
OID (numeric): 1.3.6.1.4.1.171.12.1.2.1.1.13
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: The result of the download will depend on whether the boot_up option is specified. Case 1: In the case where the master unit provides the file system and the slave unit does not provide the file system, when boot_up is specified, the file will be downloaded to the boot_up image on the slave. If boot_up is not specified, then the file will not be downloaded to this slave unit.
Case 2: In the case where the master unit does not provide the file system and the slave unit provides the file system, when boot_up is specified, the file will be downloaded to the boot_up image on the slave unit. If boot_up is not specified, the file will not be downloaded to this slave unit.
Case 3: In the case where the master unit and the slave unit both support or do not support the file system, the file will be downloaded to the specified file on the slave unit. If boot_up is specified, the downloaded file will be assigned as the boot_up image.
True: boot_up option is specified. False: boot_up option is not specified.
What is agentBscSwFileBootUpImage?
This is a read-write boolean (true/false) controlling whether downloaded firmware should become the boot image used on next restart. Set to true to make it the active firmware.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.1.2.1.1.13 snmpwalk -v2c -c public <target> AGENT-GENERAL-MIB::agentBscSwFileBootUpImage
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.1.2.1.1.13.1 snmpget -v2c -c public <target> AGENT-GENERAL-MIB::agentBscSwFileBootUpImage.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.1.2.1.1.13.1 s <value>
Start monitoring D-Link managed switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AGENT-GENERAL-MIB::agentBscSwFileBootUpImage OID value, configure state conditions and alerts, and monitor any D-Link managed switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.12 | dlink_common_mgmt | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.12.1 | agentGeneralMgmt | AGENT-GENERAL-MIB |
| 1.3.6.1.4.1.171.12.1.2 | agentBasicConfig | AGENT-GENERAL-MIB |
| 1.3.6.1.4.1.171.12.1.2.1 | agentBscSwFileTable | AGENT-GENERAL-MIB |
| 1.3.6.1.4.1.171.12.1.2.1.1 | agentBscSwFileEntry | AGENT-GENERAL-MIB |
| 1.3.6.1.4.1.171.12.1.2.1.1.13 | agentBscSwFileBootUpImage | AGENT-GENERAL-MIB |