All MIBs › ADTRAN-DS1-MIB › adDS1CurrentThrsSES
adDS1CurrentThrsSES
Module: ADTRAN-DS1-MIB
OID (symbolic): ADTRAN-DS1-MIB::adDS1CurrentThrsSES
OID (numeric): 1.3.6.1.4.1.664.2.3.3.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Seconds parameter. The default value is 10 for an approximate BER level of (10** -5).
What is adDS1CurrentThrsSES?
This is the threshold count for Severely Errored Seconds in the current 15-minute interval (default 10). SES are very corrupted seconds; exceeding 10 per 900 seconds is bad. Indicates potential circuit or equipment failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.664.2.3.3.2 snmpwalk -v2c -c public <target> ADTRAN-DS1-MIB::adDS1CurrentThrsSES
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.664.2.3.3.2.1 snmpget -v2c -c public <target> ADTRAN-DS1-MIB::adDS1CurrentThrsSES.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.664.2.3.3.2.1 i <value>
Start monitoring ADTRAN CSU/DSUs and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADTRAN-DS1-MIB::adDS1CurrentThrsSES OID value, configure state conditions and alerts, and monitor any ADTRAN CSU/DSUs and routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.664 | adtran | ADTRAN-ACTDAX-MIB |
| 1.3.6.1.4.1.664.2 | adMgmt | ADTRAN-ACTDAX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.664.2.3 | adDS1mg | ADTRAN-DS1-MIB |
| 1.3.6.1.4.1.664.2.3.3 | adDS1CurrentThreshold | ADTRAN-DS1-MIB |
| 1.3.6.1.4.1.664.2.3.3.2 | adDS1CurrentThrsSES | ADTRAN-DS1-MIB |