All MIBs › ADC-FLEXWAVE-URH-MIB › fwuRmtDARTUsedSFP
fwuRmtDARTUsedSFP
Module: ADC-FLEXWAVE-URH-MIB
OID (symbolic): ADC-FLEXWAVE-URH-MIB::fwuRmtDARTUsedSFP
OID (numeric): 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.41
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the SFP (number) used by a DART to link. There are eight possible SFP numbers. Therefore, the valid values are 1 to 8.
What is fwuRmtDARTUsedSFP?
This read-only integer (1–8) identifies which SFP (small form-factor pluggable) transceiver port the DART is using to connect back to the main unit. Network engineers need to know this when troubleshooting signal paths or planning port management on the main backplane. For example, if the value is 3, the DART is connected through SFP slot 3, so if you see signal errors on that port, you know which remote device is affected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.41 snmpwalk -v2c -c public <target> ADC-FLEXWAVE-URH-MIB::fwuRmtDARTUsedSFP
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.41.1 snmpget -v2c -c public <target> ADC-FLEXWAVE-URH-MIB::fwuRmtDARTUsedSFP.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> fwuRmtDARTUsedSFP.1
Start monitoring ADC/TE FlexWave DAS remote radio units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADC-FLEXWAVE-URH-MIB::fwuRmtDARTUsedSFP OID value, configure state conditions and alerts, and monitor any ADC/TE FlexWave DAS remote radio units from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2014 | adc | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15 | flexwave | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2 | flexwaveurh | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1 | flexwaveURHMibModule | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2 | fwuRemoteUnitObjects | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6 | fwuRmtDARTObjects | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1 | fwuRmtDARTInfo | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1 | fwuRmtDARTGeneral | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1 | fwuRmtDARTGeneralTable | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1 | fwuRmtDARTGeneralEntry | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.41 | fwuRmtDARTUsedSFP | ADC-FLEXWAVE-URH-MIB |