All MIBs › ADC-FLEXWAVE-URH-MIB › fwuRmtDARTPwrLevelMaxHoldReset
fwuRmtDARTPwrLevelMaxHoldReset
Module: ADC-FLEXWAVE-URH-MIB
OID (symbolic): ADC-FLEXWAVE-URH-MIB::fwuRmtDARTPwrLevelMaxHoldReset
OID (numeric): 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.32
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Provision to reset the Max Hold reading. Used when the input power mode is Max hold. Reset by changing from normal (0) to reset (1). Status will revert to normal once the reset is done. In snapshot mode (see fwuRmtDARTInputPowerMode) this object is not applicable (-1).
What is fwuRmtDARTPwrLevelMaxHoldReset?
This OID allows you to clear the accumulated maximum-hold power readings and start fresh. When operating in maxHold mode, you must periodically reset to discard old peaks and capture recent changes or improvements. Example: Writing reset(1) clears all held maximums; the device then begins recording new peak values from that point forward.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.32 snmpwalk -v2c -c public <target> ADC-FLEXWAVE-URH-MIB::fwuRmtDARTPwrLevelMaxHoldReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.32.1 snmpget -v2c -c public <target> ADC-FLEXWAVE-URH-MIB::fwuRmtDARTPwrLevelMaxHoldReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.32.1 i <value>
Start monitoring ADC/TE FlexWave DAS remote radio units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADC-FLEXWAVE-URH-MIB::fwuRmtDARTPwrLevelMaxHoldReset OID value, configure state conditions and alerts, and monitor any ADC/TE FlexWave DAS remote radio units from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2014 | adc | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15 | flexwave | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2 | flexwaveurh | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1 | flexwaveURHMibModule | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2 | fwuRemoteUnitObjects | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6 | fwuRmtDARTObjects | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1 | fwuRmtDARTInfo | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1 | fwuRmtDARTGeneral | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1 | fwuRmtDARTGeneralTable | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1 | fwuRmtDARTGeneralEntry | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.32 | fwuRmtDARTPwrLevelMaxHoldReset | ADC-FLEXWAVE-URH-MIB |