All MIBs › ADC-FLEXWAVE-URH-MIB › fwuRmtDARTForwardGain
fwuRmtDARTForwardGain
Module: ADC-FLEXWAVE-URH-MIB
OID (symbolic): ADC-FLEXWAVE-URH-MIB::fwuRmtDARTForwardGain
OID (numeric): 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.7
Node type: OBJECT-TYPE
Type: GAINType
Access: read-create
Description: Primary Gain in forward path of remote DART card. The range is 0-31dB with increments in steps of 1dB.
What is fwuRmtDARTForwardGain?
This OID sets the transmit amplification (gain) for the DART in 1-dB increments from 0 to 31 dB, controlling how strong the outbound signal is. Engineers adjust forward gain to balance coverage range against potential interference with neighboring cells—too high causes interference, too low leaves dead zones. For example, a setting of 15 dB amplifies the outbound signal by 15 dB to reach farther mobile devices.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2014 | adc | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15 | flexwave | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2 | flexwaveurh | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1 | flexwaveURHMibModule | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2 | fwuRemoteUnitObjects | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6 | fwuRmtDARTObjects | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1 | fwuRmtDARTInfo | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1 | fwuRmtDARTGeneral | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1 | fwuRmtDARTGeneralTable | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1 | fwuRmtDARTGeneralEntry | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.2.6.1.1.1.1.7 | fwuRmtDARTForwardGain | ADC-FLEXWAVE-URH-MIB |