All MIBs › ADC-FLEXWAVE-URH-MIB › fwuHstDARTPeakInputPwrLvl2
fwuHstDARTPeakInputPwrLvl2
Module: ADC-FLEXWAVE-URH-MIB
OID (symbolic): ADC-FLEXWAVE-URH-MIB::fwuHstDARTPeakInputPwrLvl2
OID (numeric): 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.17
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Peak Input Power Level 2 to a Host DART. Incase of diversity, this value will be NA.
What is fwuHstDARTPeakInputPwrLvl2?
Displays the highest input power level measured on input source 2, or "NA" if diversity (dual-antenna) mode is not configured. Engineers on dual-antenna systems monitor this to detect imbalance between the two signal paths or antenna failures. Example: "-48.5 dBm" shows the secondary antenna peaked at -48.5 dBm, slightly weaker than the primary.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.17 snmpwalk -v2c -c public <target> ADC-FLEXWAVE-URH-MIB::fwuHstDARTPeakInputPwrLvl2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.17.1 snmpget -v2c -c public <target> ADC-FLEXWAVE-URH-MIB::fwuHstDARTPeakInputPwrLvl2.1
Start monitoring ADC/TE FlexWave DAS remote radio units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADC-FLEXWAVE-URH-MIB::fwuHstDARTPeakInputPwrLvl2 OID value, configure state conditions and alerts, and monitor any ADC/TE FlexWave DAS remote radio units from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2014 | adc | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15 | flexwave | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2 | flexwaveurh | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1 | flexwaveURHMibModule | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.1 | fwuHostUnitObjects | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.1.6 | fwuHstDARTObjects | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1 | fwuHstDARTInfo | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1 | fwuHstDARTGeneral | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1 | fwuHstDARTGeneralTable | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1 | fwuHstDARTGeneralEntry | ADC-FLEXWAVE-URH-MIB |
| 1.3.6.1.4.1.2014.15.2.1.1.6.1.1.1.1.17 | fwuHstDARTPeakInputPwrLvl2 | ADC-FLEXWAVE-URH-MIB |