ADC-FLEXWAVE-URH-MIB :: fwuEventNotifHysteresis

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsADC-FLEXWAVE-URH-MIBfwuEventNotifHysteresis

fwuEventNotifHysteresis

Module: ADC-FLEXWAVE-URH-MIB

OID (symbolic): ADC-FLEXWAVE-URH-MIB::fwuEventNotifHysteresis

OID (numeric): 1.3.6.1.4.1.2014.15.2.1.3.5.9

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Time period, in seconds, for which an event has to persist before a notification is sent. For this value to be useable, ensure that fwuEnableNotifHysteresis is enabled.

What is fwuEventNotifHysteresis?

This OID sets the number of seconds (between 10 and 600) that an alarm condition must remain active before the device sends a trap notification. Use this to filter out brief, transient alarms that might otherwise trigger unnecessary alerts in your monitoring system. If you set this to 60 seconds, the device will only notify you if a power failure or temperature warning persists for a full minute.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2014.15.2.1.3.5.9
snmpwalk -v2c -c public <target> ADC-FLEXWAVE-URH-MIB::fwuEventNotifHysteresis

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2014.15.2.1.3.5.9.1
snmpget -v2c -c public <target> ADC-FLEXWAVE-URH-MIB::fwuEventNotifHysteresis.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2014.15.2.1.3.5.9.1 i <value>

Start monitoring ADC/TE FlexWave DAS remote radio units with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADC-FLEXWAVE-URH-MIB::fwuEventNotifHysteresis OID value, configure state conditions and alerts, and monitor any ADC/TE FlexWave DAS remote radio units from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2014adcADC-FLEXWAVE-URH-MIB
1.3.6.1.4.1.2014.15flexwaveADC-FLEXWAVE-URH-MIB
1.3.6.1.4.1.2014.15.2flexwaveurhADC-FLEXWAVE-URH-MIB
1.3.6.1.4.1.2014.15.2.1flexwaveURHMibModuleADC-FLEXWAVE-URH-MIB
1.3.6.1.4.1.2014.15.2.1.3fwuGeneralObjectsADC-FLEXWAVE-URH-MIB
1.3.6.1.4.1.2014.15.2.1.3.5fwuSnmpSettingsADC-FLEXWAVE-URH-MIB
1.3.6.1.4.1.2014.15.2.1.3.5.9fwuEventNotifHysteresisADC-FLEXWAVE-URH-MIB