All MIBs › ACP-MIB › acpInputSourceIdA
acpInputSourceIdA
Module: ACP-MIB
OID (symbolic): ACP-MIB::acpInputSourceIdA
OID (numeric): 1.3.6.1.4.1.1166.1.11.3.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The Input Source Id is used to identify the input source for this ACP in different products. One or both parts of the Id may be used in identifying where the input for the ACP comes from. When the Input Source Id A is set to 255 then the Id is invalid. If Id A is invalid the Id B is assumed invalid also. For example, the MPS uses the input source id to designate the location of the physical connector that is mapped to the ACP. In the case of the decrypt ACPs, InputSourceIdA is used to indicate the slot, and InputSourceIdB is used to indicate the port. Only decrypt ACPs have their source identified in this way. Encrypt ACPs do not have an identified source and their IdA is always set to Invalid (255).
What is acpInputSourceIdA?
This OID stores the primary part of a two-part identifier that tells the ACP which physical input source (cable port, satellite feed, IP stream, etc.) is connected to it—a value of 255 indicates the ID is invalid or unconfigured. Network technicians use this to trace where the encrypted MPEG signal is coming from during installation and troubleshooting. For example, an InputSourceIdA of 3 might mean the ACP is connected to satellite transponder 3, while 255 means no valid input is assigned.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.11.3.1.18 snmpwalk -v2c -c public <target> ACP-MIB::acpInputSourceIdA
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.11.3.1.18.1 snmpget -v2c -c public <target> ACP-MIB::acpInputSourceIdA.1
Start monitoring Motorola legacy access/telecom equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACP-MIB::acpInputSourceIdA OID value, configure state conditions and alerts, and monitor any Motorola legacy access/telecom equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.11 | acpStatus | ACP-MIB |
| 1.3.6.1.4.1.1166.1.11.3 | acpStatusTable | ACP-MIB |
| 1.3.6.1.4.1.1166.1.11.3.1 | acpStatusEntry | ACP-MIB |
| 1.3.6.1.4.1.1166.1.11.3.1.18 | acpInputSourceIdA | ACP-MIB |