ACC-X25 :: accX25SwitchStatus

MIB Reference — IPNetwork Monitor · Updated September 13, 2026

All MIBsACC-X25accX25SwitchStatus

accX25SwitchStatus

Module: ACC-X25

OID (symbolic): ACC-X25::accX25SwitchStatus

OID (numeric): 1.3.6.1.4.1.5.1.1.17.8.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This Object controls whether X.25 switching is enabled or disabled.

What is accX25SwitchStatus?

This read-write OID controls whether the router will switch or bridge X.25 traffic between its interfaces, stored as an integer (1 for enabled, 0 for disabled). Engineers use this to turn X.25 switching on and off dynamically without rebooting the device. For example, setting it to 0 immediately stops all new X.25 connections while leaving existing ones in place.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.1
snmpwalk -v2c -c public <target> ACC-X25::accX25SwitchStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.1.1
snmpget -v2c -c public <target> ACC-X25::accX25SwitchStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.17.8.1.1 i <value>

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-X25::accX25SwitchStatus OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
1.3.6.1.4.1.5.1.1.17accX25ACC-MIB
1.3.6.1.4.1.5.1.1.17.8accX25SwitchACC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5.1.1.17.8.1accX25SwitchStatusACC-X25