All MIBs › ACC-X25 › accX25SwitchAddrTransDir
accX25SwitchAddrTransDir
Module: ACC-X25
OID (symbolic): ACC-X25::accX25SwitchAddrTransDir
OID (numeric): 1.3.6.1.4.1.5.1.1.17.8.6.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
An Integer that identifies whether this entry applies to inbound or to outbound switched X.25 calls.
What is accX25SwitchAddrTransDir?
This integer specifies whether the address translation rule applies to inbound calls, outbound calls, or both directions. Engineers set this when creating translation rules to ensure rewriting happens only on the intended call direction. An example value of 1 indicates the rule applies to inbound calls arriving at the X.25 interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.6.1.2 snmpwalk -v2c -c public <target> ACC-X25::accX25SwitchAddrTransDir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.8.6.1.2.1 snmpget -v2c -c public <target> ACC-X25::accX25SwitchAddrTransDir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.17.8.6.1.2.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17 | accX25 | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8 | accX25Switch | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.6 | accX25SwitchAddrTransTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.6.1 | accX25SwitchAddrTransEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.2 | accX25SwitchAddrTransDir | ACC-X25 |