All MIBs › ACC-X25 › accX25AtNetInOutAddr
accX25AtNetInOutAddr
Module: ACC-X25
OID (symbolic): ACC-X25::accX25AtNetInOutAddr
OID (numeric): 1.3.6.1.4.1.5.1.1.17.1.1.3
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description:
X.25 address to use when calling this destination. (both X.25 addresses are checked when mapping an X.25 address to an IP address) Object required in entry-adding SET PDU.
What is accX25AtNetInOutAddr?
This OID holds the X.25 address to dial when placing outbound calls to a destination. Engineers configure this when they need to specify the exact X.25 address format required by a remote X.25 network. For example, '31415926500' is the X.25 number to dial for outbound traffic to that destination.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.1.1.3 snmpwalk -v2c -c public <target> ACC-X25::accX25AtNetInOutAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.17.1.1.3.1 snmpget -v2c -c public <target> ACC-X25::accX25AtNetInOutAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.17.1.1.3.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17 | accX25 | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.1 | accX25AtTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.1.1 | accX25AtEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.17.1.1.3 | accX25AtNetInOutAddr | ACC-X25 |