All MIBs › ACC-SYSTEM › accReset
accReset
Module: ACC-SYSTEM
OID (symbolic): ACC-SYSTEM::accReset
OID (numeric): 1.3.6.1.4.1.5.1.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
A Set command on this object will cause an immediate reset of the unit.
What is accReset?
This read-write OID is a trigger that immediately reboots the device when a management system writes a specific value to it. Network engineers use this for remote device restarts without physical access, such as after applying configuration changes that require a reboot. For example, writing the value '1' to this OID would immediately reboot the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.1.1.4 snmpwalk -v2c -c public <target> ACC-SYSTEM::accReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.1.1.4.1 snmpget -v2c -c public <target> ACC-SYSTEM::accReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.1.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1 | accSystem | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1.1 | accSysInfo | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1.1.4 | accReset | ACC-SYSTEM |