All MIBs › ACC-SYSTEM › accLoginTimeout
accLoginTimeout
Module: ACC-SYSTEM
OID (symbolic): ACC-SYSTEM::accLoginTimeout
OID (numeric): 1.3.6.1.4.1.5.1.1.1.2.3
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-write
Description:
Session inactivity timer. Zero disables timer (no timeout) Default value is zero Range is 0-86400 seconds
What is accLoginTimeout?
This OID sets the number of seconds the device will wait before automatically closing an inactive session, ranging from 0 to 86400 seconds (0-24 hours). Network engineers configure this to balance security (short timeouts) against convenience (longer timeouts for human operators). Setting it to 1800 seconds (30 minutes) means idle sessions are automatically closed after half an hour.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.1.2.3 snmpwalk -v2c -c public <target> ACC-SYSTEM::accLoginTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.1.2.3.1 snmpget -v2c -c public <target> ACC-SYSTEM::accLoginTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.1.2.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1 | accSystem | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1.2 | accSessionCtrl | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1.2.3 | accLoginTimeout | ACC-SYSTEM |