All MIBs › ACC-SYSTEM › accConfiguration
accConfiguration
Module: ACC-SYSTEM
OID (symbolic): ACC-SYSTEM::accConfiguration
OID (numeric): 1.3.6.1.4.1.5.1.1.1.1.7.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Set the action to perform on the active configuration. A set to load or default will immediately reset the unit. On the restart the new configuration (either a previously saved one or the default configuration) will be used.
What is accConfiguration?
This writable OID controls which configuration becomes active on the device: you can load a saved configuration, apply defaults, or trigger other configuration actions, with changes taking effect on the next reboot. Engineers use this to apply configuration changes and perform recovery operations when needed. Example: setting this to 1 might trigger a load of the default factory configuration and reboot the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.1.1.7.1 snmpwalk -v2c -c public <target> ACC-SYSTEM::accConfiguration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.1.1.7.1.1 snmpget -v2c -c public <target> ACC-SYSTEM::accConfiguration.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.1.1.7.1.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1 | accSystem | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1.1 | accSysInfo | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1.1.7 | accSysConfigInfo | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1.1.7.1 | accConfiguration | ACC-SYSTEM |