All MIBs › ACC-RIP › accRipProfileUpdateInterval
accRipProfileUpdateInterval
Module: ACC-RIP
OID (symbolic): ACC-RIP::accRipProfileUpdateInterval
OID (numeric): 1.3.6.1.4.1.5.1.1.16.13.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The periodic RIP update interval.
What is accRipProfileUpdateInterval?
This OID specifies how often (in seconds, range 5 to 3600) this RIP profile broadcasts its periodic routing updates; shorter intervals speed propagation but use more bandwidth. Network engineers adjust this based on network size and change frequency—busy networks might use 30 seconds while stable small networks might use 60 seconds. Setting to 30 means RIP will broadcast its entire routing table every 30 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.16.13.1.2 snmpwalk -v2c -c public <target> ACC-RIP::accRipProfileUpdateInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.16.13.1.2.1 snmpget -v2c -c public <target> ACC-RIP::accRipProfileUpdateInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.16.13.1.2.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.16 | accRip | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.16.13 | accRipProfileTable | ACC-RIP |
| 1.3.6.1.4.1.5.1.1.16.13.1 | accRipProfileEntry | ACC-RIP |
| 1.3.6.1.4.1.5.1.1.16.13.1.2 | accRipProfileUpdateInterval | ACC-RIP |