All MIBs › ACC-RIP › accRipDefaultVersion
accRipDefaultVersion
Module: ACC-RIP
OID (symbolic): ACC-RIP::accRipDefaultVersion
OID (numeric): 1.3.6.1.4.1.5.1.1.16.11.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The default verison of RIP to use on new RIP interfaces.
What is accRipDefaultVersion?
This OID controls which version of the RIP protocol the device uses by default when creating new RIP routing interfaces. You configure this based on your network's requirements: RIPv1 for older equipment compatibility, or RIPv2 for more advanced features like variable-length subnets. Setting it to 'RIPv2' ensures that any new RIP interfaces added to the device automatically use the modern protocol version without additional configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.16.11.2 snmpwalk -v2c -c public <target> ACC-RIP::accRipDefaultVersion
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.16.11.2.1 snmpget -v2c -c public <target> ACC-RIP::accRipDefaultVersion.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.16.11.2.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.16 | accRip | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.16.11 | accRipGeneral | ACC-RIP |
| 1.3.6.1.4.1.5.1.1.16.11.2 | accRipDefaultVersion | ACC-RIP |