All MIBs › ACC-RIP › accRip2IfConfExtDefaultOnly
accRip2IfConfExtDefaultOnly
Module: ACC-RIP
OID (symbolic): ACC-RIP::accRip2IfConfExtDefaultOnly
OID (numeric): 1.3.6.1.4.1.5.1.1.16.12.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Generate a default route only on this interface.
What is accRip2IfConfExtDefaultOnly?
This OID controls whether a RIPv2 interface generates and advertises only a default route on that interface, rather than the full routing table. You enable this on interfaces that should only provide basic routing information to stub networks or low-capacity neighbors, reducing update traffic. Setting this to 'enabled' on the interface toward a small branch office means that interface will send only the default route, minimizing bandwidth use while still providing routing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.16.12.1.3 snmpwalk -v2c -c public <target> ACC-RIP::accRip2IfConfExtDefaultOnly
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.16.12.1.3.1 snmpget -v2c -c public <target> ACC-RIP::accRip2IfConfExtDefaultOnly.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.16.12.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.16 | accRip | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.16.12 | accRip2IfConfExtTable | ACC-RIP |
| 1.3.6.1.4.1.5.1.1.16.12.1 | accRip2IfConfExtEntry | ACC-RIP |
| 1.3.6.1.4.1.5.1.1.16.12.1.3 | accRip2IfConfExtDefaultOnly | ACC-RIP |