All MIBs › ACC-MIB › accSlotSevereCongPct
accSlotSevereCongPct
Module: ACC-MIB
OID (symbolic): ACC-MIB::accSlotSevereCongPct
OID (numeric): 1.3.6.1.4.1.5.1.1.5.2.1.32
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Percent Congested
What is accSlotSevereCongPct?
This OID sets the congestion threshold percentage (1-100) that triggers severe congestion alerts on a port. Administrators tune this to define when the equipment should raise alarms if link utilization climbs above the threshold. Setting this to 85 means the device will flag the port as severely congested when utilization exceeds 85%.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.5.2.1.32 snmpwalk -v2c -c public <target> ACC-MIB::accSlotSevereCongPct
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.5.2.1.32.1 snmpget -v2c -c public <target> ACC-MIB::accSlotSevereCongPct.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.5.2.1.32.1 i <value>
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-MIB::accSlotSevereCongPct OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5 | accSlot | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2 | accSlotTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2.1 | accSlotEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.5.2.1.32 | accSlotSevereCongPct | ACC-MIB |