All MIBs › ACC-MIB › accDnX25InAddr
accDnX25InAddr
Module: ACC-MIB
OID (symbolic): ACC-MIB::accDnX25InAddr
OID (numeric): 1.3.6.1.4.1.5.1.1.19.21.1.18
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description:
Packets from this address are accepted on this circuit. Object will be set to default value if not present in entry-adding SET PDU.
What is accDnX25InAddr?
This OID specifies which X.25 address or addresses are allowed to send inbound packets on this DECNET circuit. Network engineers use this to filter which remote systems can reach your router over the X.25 connection. Setting this to '3141592654' means the router will only accept inbound X.25 packets from that specific address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.19.21.1.18 snmpwalk -v2c -c public <target> ACC-MIB::accDnX25InAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.19.21.1.18.1 snmpget -v2c -c public <target> ACC-MIB::accDnX25InAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.19.21.1.18.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accDnX25InAddr.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.19 | accDn | ACC-DN |
| 1.3.6.1.4.1.5.1.1.19.21 | accDnCktTable | ACC-DN |
| 1.3.6.1.4.1.5.1.1.19.21.1 | accDnCktEntry | ACC-DN |
| 1.3.6.1.4.1.5.1.1.19.21.1.18 | accDnX25InAddr | ACC-MIB |