All MIBs › ACC-MIB › accBrFpPriDefault
accBrFpPriDefault
Module: ACC-MIB
OID (symbolic): ACC-MIB::accBrFpPriDefault
OID (numeric): 1.3.6.1.4.1.5.1.1.4.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Default priority to use for protocol types not specifically enumerated in table. discard(0), low(1), normal(2), high(3)
What is accBrFpPriDefault?
This OID stores the default priority level (0-3) assigned to network protocols that don't have an explicit priority configured. Network engineers use this to set baseline QoS behavior for unknown or unconfigured protocol types on the bridge. For example, setting this to 2 (normal) means any unrecognized protocol gets normal priority until explicitly configured otherwise.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.9 snmpwalk -v2c -c public <target> ACC-MIB::accBrFpPriDefault
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.9.1 snmpget -v2c -c public <target> ACC-MIB::accBrFpPriDefault.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.9.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.9 | accBrFpPriDefault | ACC-MIB |