All MIBs › ACC-MIB › accBrFilterMode
accBrFilterMode
Module: ACC-MIB
OID (symbolic): ACC-MIB::accBrFilterMode
OID (numeric): 1.3.6.1.4.1.5.1.1.4.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When Filter Mode is on, entries in the Filtering table are used to determine the disposition of each frame. When Filter mode is off, no filtering is done.
What is accBrFilterMode?
This OID enables or disables the entire frame filtering system on the bridge. Engineers turn filtering on to enforce network policies by applying rules that allow or block specific traffic patterns. For example, enabling filter mode activates the filtering table so configured filter rules start controlling which frames pass through.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.16 snmpwalk -v2c -c public <target> ACC-MIB::accBrFilterMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.16.1 snmpget -v2c -c public <target> ACC-MIB::accBrFilterMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.16.1 i <value>
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-MIB::accBrFilterMode OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4.16 | accBrFilterMode | ACC-MIB |