All MIBs › ACC-MIB › accBrFilterEntPort
accBrFilterEntPort
Module: ACC-MIB
OID (symbolic): ACC-MIB::accBrFilterEntPort
OID (numeric): 1.3.6.1.4.1.5.1.1.4.18.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: In all cases, the destination port of the received frame.
What is accBrFilterEntPort?
This OID specifies which physical port frames matching this filter rule should be sent to. Engineers use this to route filtered traffic to specific bridge ports or interfaces. For example, a value of 3 means frames matching this filter rule exit through physical port 3.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.18.1.4 snmpwalk -v2c -c public <target> ACC-MIB::accBrFilterEntPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.4.18.1.4.1 snmpget -v2c -c public <target> ACC-MIB::accBrFilterEntPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.4.18.1.4.1 i <value>
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-MIB::accBrFilterEntPort OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5.1.1.4 | accBridge | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18 | accBrFilterTable | ACC-FLASH |
| 1.3.6.1.4.1.5.1.1.4.18.1 | accBrFilterEntry | ACC-FLASH |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.4.18.1.4 | accBrFilterEntPort | ACC-MIB |