All MIBs › ACC-HUB › accEnetHubBitError
accEnetHubBitError
Module: ACC-HUB
OID (symbolic): ACC-HUB::accEnetHubBitError
OID (numeric): 1.3.6.1.4.1.5.1.1.39.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
This shows whether a bit-error has occurred
What is accEnetHubBitError?
The ACC-HUB::accEnetHubBitError OID is a read-only flag that indicates whether bit errors have been detected on an Ethernet hub port. A network engineer monitors this to identify ports with signal quality problems, cable issues, or hardware faults that require attention. For example, accEnetHubBitError = 'yes' alerts you that the port is experiencing corruption or noise on the line.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.39.1.1.5 snmpwalk -v2c -c public <target> ACC-HUB::accEnetHubBitError
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.39.1.1.5.1 snmpget -v2c -c public <target> ACC-HUB::accEnetHubBitError.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.39 | accEnetHub | ACC-HUB |
| 1.3.6.1.4.1.5.1.1.39.1 | accEnetHubStatTable | ACC-HUB |
| 1.3.6.1.4.1.5.1.1.39.1.1 | accEnetHubStatEntry | ACC-HUB |
| 1.3.6.1.4.1.5.1.1.39.1.1.5 | accEnetHubBitError | ACC-HUB |